Transmission Dual Linear Solenoid – Signs Of Failing Solenoid Transmission

Transmission Dual Linear Solenoid controls pressures during the transmission shift. During replacement, the solenoid is easy to change and is located on the outside of the transmission. However, will be needing a base gasket and O-rings needed for an easy install.

Transmission Dual Linear Solenoid

However, if your transmission has a hard or soft long shift solenoid may help resolve your problems. And the first diagnostic step in the Honda repair manual asks you to replace the solenoid and retest.

So, the dual linear solenoid should be replaced on all rebuilds.

Transmission Dual Linear Solenoid

A solenoid is an electronic component in a car that is in charge of the flow of transmission fluid. Its work is more like a valve to control the opening and closing time for fluid flow. However, It is controlled electronically by the vehicle’s Engine Control Module (ECM) or Transmission Control Module (TCM), depending on the car.

Moreover, there are different solenoids located in different positions and have different functions.

Functions of Transmission Linear Solenoid

What exactly do transmission solenoids do?

If you’re driving your car down the road. The transmission switches the gears automatically and smoothly. The solenoid gets the signal and controls the plunger to open or close with the spring inside.

Depending on the plunger opening or closing, the solenoid controls the fluid flows into the valve body and pressurizes the desired clutches and bands. Then the transmission changes gears, which is why you can enjoy your driving down the road.

Signs Of Failing Solenoid Transmission

Furthermore, with the quality maintenance for your car engine periodically, the solenoids can receive good care from the mechanics. The technicians can check if solenoids are in a good situation whilst the connection of diagnose computer and engine control module and computer.

However, there are specific failure codes on the computer to show solenoids’ problems.

When you see the following steps, you will know that the transmission Solenoid is failing.

  • Erratic Shifting
  • The Transmission Won’t shift downward
  • Severe Shifting Delay / Stuck in Neutral

These are signs of a failing Solenoid.

FAQs On Transmission Dual Linear Solenoid

Here are some of the frequently asked questions on transmission Solenoid.

How To Test A Linear Solenoid

The testing of on/off solenoids is very simple and straightforward. Pressure should be applied to the inlet, and if it is normally closed, you shouldn’t see pressure at the outlet. Once energized, you should see pressure at the outlet.

How To Adjust A Shift Solenoid?

Adjusting Solenoid Block: to adjust the block, place the pentagon-shaped tip of the solenoid adjustment tool into the adjuster screw recess of the clutch pressure control solenoid “A” or “B.”

Secondly, turn the adjuster screw 1⁄8 to 1⁄4 turn clockwise to increase pressure for solenoid “A”, and counterclockwise to increase pressure for solenoid “B”.

Can l drive with a bad solenoid?

The answer to this question is Yes. Normally, one can ride a car with a bad shift solenoid. Fluid pressure control should keep functioning in the gear with the working solenoid, but you should avoid adding any serious stress on the transmission — you can tow or drag racing — if necessary.

Can I Bypass a Shift Solenoid?

To bypass the shift and TCC solenoids, all you need is to connect standard 194 light bulbs to these individual circuits coming from the PCM. Next thing is to connect the other side of the bulbs to ignition B+. Then, the light bulbs will serve as a “load” which will simulate the solenoids.

What Makes An Automatic Transmission Control Solenoid Premium?

Premium quality: Long life-span matters, that is why the automatic transmission control solenoid is crafted from reinforced material. It features heat resistance and anti-corrosive quality, ensuring superior performance and durability.

How To Buy Transmission Dual Linear Solenoid

If you want to replace the dual linear Solenoid transmission of your car, here are steps to buying the item.

  • Navigate to the Amazon page at
  • Find the product you want and click on It
  • Add to cart
  • Select the quantity you want and follow the prompt to checkout

These are steps to purchase transmission Dual Linear Solenoid from Amazon online store.

Check Out:


Please enter your comment!
Please enter your name here